Diamagroove

Tybrushe Pet Supply is the Canadian Distributor for Whitman's Diamagroove & Diamastripper

The DiamaGroove (any model) fits nicely on the Beacon Hill Cordless Lithium Nail Grinder

We have utilized the "Best of the Best" in the quality of materials used to produce a masterpiece of rotary technology.

We have incorporated the best authentic electroplated diamond available used also in the machining processes of carbide grinding...this is designed to last a very long time! You can operate the Diamagrooves at a slower speed and still get optimal performance. This has the same electroplating that the Diamastrippers possess. A unique feature of an 'inner cooler' was built-in to the inside of the Diamaseries tools (see above picture-hole goes through entire tool for air travel). This feature is designed to maintain the cool temperature of the Diamagrooves which in turn will keep the NAILS COOL as well. Also, note the concave radius on the outside of the Diamagrooves...this keeps the nail focused so as not to slide off the Diamagrooves. Are you tired of getting cuts from the conventional sandpaper drum and inexpensive imported make-believe diamond rotary tools?....We have considered SAFETY in every aspect on the Diamagrooves...no sharp edges...the electroplating that we have choosen is designed to grind nails...NOT SKIN OR PADS!!! Hair winding on the Diamagrooves shaft/tool is also minimized! Provides excellent finish on the nails leaving no splinters or cracks.

Keeps nails cool

Vibrations are tremendously reduced

Grind at a slower RPM get great, efficient performance

Outlasts any conventional/imported nail grinding attachment

Safe on hands/skin/dog pads

Concaved area keeps nails focused on grinding area

Leaves a great finish on the toenail...safe!

Does not have the tendency to entrap hair

It is the most aggressive of the 3 grits and will get the nails filed down in the least amount of time.

The Medium grit will give you a similar outcome as the Standard, but with a smoother finish; the Medium will take a while longer than the Standard to get the length of nail filed down.

The Fine is the perfect grit for finishing work, you will obtain an ultra smooth finish with the Fine grit; it is not necessarily meant for taking much length off of the nail, as it will take much longer to achieve this.

Our third model is the Detailer. Its shape resembles the Boxer model but on a smaller scale. It is great for smaller breeds or for finishing and detail work on all breeds. It is only offered in Medium, which is our Standard, and Fine. You can also special order this in the Course grit.

Diamagroove Pinnacle

Colletless. Threads onto the motor assy armature shaft after the collet and collet sleeve are removed

The Pinnacle offers an hourglass shape giving you a 'ride-line' to easily position the nail.

This is ideal when you have a dog that is nervous or wild when getting their nails Dremeled, or if you are an inexperienced handler

The Diamagroove Pinnacle is the Flagship of the Diamaseries tools. The Pinnacle embodies the most basic, safest, workhorse design characteristics within the Diamaseries tools.

Diamagroove Boxer (Working dog model)

Colletless. Threads onto the motor assy armature shaft after the collet and collet sleeve are removed

Boxer and working breeds usually require a little more attention regarding maintenance to the toenails. The topside of the nail has a discoloration that can appear.

The Diamagroove Boxer is specially designed to polish/grind the topside of the nail as well as grind the end of the nail as well...in a production setting

The Boxer offers more of a 'pyramid-shape,' with a bit of tip that is more narrow than the base. This offers more versatility to get closer to the paw, go over the top of the nail, or to get under/around nails that are a bit curved under. Many customers who show dogs prefer the Boxer model because they feel it is easier to grind the top of the nail when trying to eliminate any discoloration.

The Pinnacle and Boxer are both offered in 3 grits: Standard, Medium & Fine.

The Standard grit is the most popular. And the only one that Tybrushe Carries in the Boxer

Diamagroove Detailer (Small dog model)

Our third model is the Detailer. Its shape resembles the Boxer model but on a smaller scale. It is great for smaller breeds or for finishing and detail work on all breeds. It is only offered in Medium, which is our Standard, and Fine. You can also special order this in the Course grit.

Tybrushe only carries the Standard.

Different manufacturers other than Dremel use different size motor armatures. The exposed end of these armatures are usually threaded. The thread size/pitch and the overall diameter of the threaded armature is not consistent with all manufacturers. When ordering please mention what brand/style of motor driven device you are using. This assures that we are supplying the correct style of Diamagroove for your application/motor driven device.

Directions: Diamagroove Pinnacle must be hand-threaded (no tools are to be used) completely onto the armature of the Dremel(TM) or Beacon Hill Cordless Lithium Nail Grinder

Diamaclean - $20.00

Cleaning Kit - The perfect tools to keep your DiamaGroove Rotary Tools Maintained and running like new

DiamaStripper with Teeth

DiamaStripper without Teeth

DiamaStripper Stubby

Diamastubbie with Teeth is made with 1/2" smaller head for finer detailed Work

DiamaStripper - $250 - includes shipping (does not include insurance )

Designed for both right and left handed use

Square tooth design prevents coat breakage

Authentic electro-plate diamond plating

Lightweight – just 3 oz.!

Precision molded ergonomic handle

Proper hair growth is extremely important in maintain the coat on a rough coated dog. If the hair is not pulled correctly the results will not be optimal. Most conventional stripping tools have a ‘V’ tooth design. Hair will gather at the base of the V tooth and will ‘cut or break off’ resulting in “Breaking the Coat”. The DiamaStripper was designed with a square tooth and square gusset style tooth. The result was NO coat breakage or cutting. The diamond electroplating on the DiamaStrippers prevents slippage of hair. This, along with the ergonomic handle, allows the person hand-stripping to not over grip while using the DiamaStrippers which helps eliminate arm/hand fatigue.

Made in the U.S.A.

The DiamaStripper was created, patented, assembled, and MADE in the USA! The entire tool was made in Michigan. By keeping the manufacturing process in the USA we were able to maintain the overall quality of each and every tool.

MADE IN MICHIGAN, USA

Manufactured by Fast n' Furryous LLC.